Grade C35E 1.1181

This European Standard specifies requirements for semi-finished products, bars and rods for fasteners with properties specified at elevated and/or low temperatures made of non-alloy and alloy (including stainless) steels and nickel alloys as given in Table 1. The requirements of this standard may be applied also to the finished fasteners. The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard.

Chemical Composition

Material designation		Chemical composition, % by mass
Element	Number	C	Si	Mn	P max.	S max.	Altot	B	Cr	Mo	Ni	V	Others
C35E	1.1181	0,32 to 0,39	≤ 0,40	0,50 to 0,80	0,030	0,015 b	‒	‒	≤ 0,40	≤ 0,10	≤ 0,40	‒	Cr+Mo+Ni: ≤ 0,63

Mechanical Properties

Material designation		Heat treatment condition a	Diameter c (d mm)	Proof strength (Rp0,2 MPa min.)	Tensile strength (Rm MPa)	Elongation after fracture (A % min)	Reduction in area (Z % min)	Impact energy (ISO-V) at 20 °C (KV2 J min)
Name	Number
C35E	1.1181	+N	d ≤ 60	300	500 to 650	20	‒	27
		+QT	d ≤ 60	340	560 to 710	22	45	55
			60 < d ≤ 150	340	560 to 710	22	45	39