Grade B8S

ASTM A193 Grade B8S Specification for high tensile bolts, screws, stud bolts, anchor bolts, threaded rods and other threaded fasteners, made from Alloy 218 / UNS S21800 / Nitronic 60 stainless steel. ASTM A193 Grade B8S is a standard material specification for high strength, corrosion resistant Alloy 218 / UNS S21800 / Nitronic 60 stainless steel fasteners such as bolts, screws, studs, threaded rods and other externally threaded parts, for use in high tensile, high temperature and special purpose applications such as pressure piping & pressure vessels bolting. Grade B8S is a carbide solution treated stainless steel further divided into class 1C and class 1D, both having a minimum tensile requirement of 100 ksi, yield 55 ksi and maximum hardness limit of 271 HBW or 28 HRC. This specification covers requirements for chemical composition, mechanical properties, hardness, heat-treatment and recommended nuts-washers for Grade B8S Fasteners.

Tensile Class

Property	Description
Class 1C	Carbide Solution Treated
Class 1D

Chemical Composition

Element	Austenitic Stainless Steel
	Alloy 218 / UNS S21800 / Nitronic 60
	CompositionA, %
Carbon	0.10 max
Manganese	7.00 - 9.00
Phosphorus	0.060 max
Sulfur	0.030 max
Silicon	3.50 - 4.50
Chromium	16.00 - 18.00
Nickel	8.00 - 9.00
Nitrogen	0.08 - 0.18

^AThe intentional addition of Bi, Se, Te, and Pb is not permitted.

Mechanical Properties

Tensile Class	Diameter, Inch	Tensile Strength, min, ksi	Yield Strength, min, 0.2% offset, ksi	Elongation in 4D, min, %	Reduction of Area, min, %	Hardness, max
								Class 1C & 1D	All Sizes	95	50	35	55	271 HBW or 28 HRC

Heat Treatment: Carbide Solution Treated

Recommended Nuts & Washers

Nut Specification	Washer Specification
ASTM A194 Grade 8S	ASTM A240 UNS S21800

Fasteners

Commonly Produced B8S Fasteners
Hex Bolts	Heavy Hex Bolts	Stud Bolts	Threaded Rods	Anchor Bolts
Eye Bolts	Socket Head Cap Screws	Countersunk Screws	U Bolts	Square Head Bolts